Bright colors metallic powder coating with fine shimmer

Product Item : 1040
Category： Metallic Finish Powder Coating
electrostatic
dry
thermosetting
metallic finish
Product description：metallic finish powder coating,china manufacturer powder coating,bright colors powder coating, powder coating paint
INQUIRY EMAIL

Golden Metallic Powder Coating with fine shimmer

polyester powder coating based on saturated polyester resins specially selected for exterior use. It is formulated to give properties of good flow-out and satin or glossy finish. Its outstanding resistance to ultra-violet light and atmospheric aging make it highly decorative and durable in outdoor environment,It is widely used for outdoor furniture,architectural hardware,air-conditioners,bicycle frames,garage doors and signboards etc .

Main Material	Polyester resin,barium sulfate,titanium dioxide
Surface Type	Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome, transparent,semitransparent,metallic,and special pattern
Powder Properties	Specific gravity : 1.3 - 1.75 (depend on colors)
Powder Properties	Average particle size : 35 - 45um
Coating Properties	Film thickness(ISO 2178) :60 - 90 μm
	Coverage:15 square based on 60μm
	Pencil hardness: ASTM D3363,H-2H
	Adhesion :GB/T 9286-1998,0 grade
	Bending test:GB/T 6742 ,=<2mm
	Cupping test:GB/T 9753,>=7mm
	Direct and reverse impact (ASTM D2794) : > 50kg.cm
	Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion
	Heat and moisture test GB/T 1740,>=1000 hours,no change
Application Schedule	Applied by : Electrostatic spraying devices
Application Schedule	Curing schedule :10 minutes at 200 ℃
Advantage	Good adhesion,anti-corrosion,UV resistant, strong coating film,
Advantage	Accurate colors, good leveling
Shelf Life	12 months